A: Normal position of the crown
C: Position for setting the time
To set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.
A: Normal position of the crown
C: Position for setting the time
To set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.
A: Normal position of the crown
C: Position for setting the time
To set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.
1. Touch 1 sec
2. Active Mode
3. Touch 1.5 sec for backlight
Timeout after 20 sec stays in last activated mode
For an optimal use of the touch interface, wear the watch on your wrist or touch the battery cover
4. Scroll to change function
5. Seconds
6. Hours
7. Symbols
8. Minutes
9. Chrono, alarm, timer are only visible when active
10. Touch 1.5 sec
11. Short touch
12. Touch 1.5 sec to confirm
13. Scroll left for - / Scroll right for +
A: Normal position of the crown
C: Position for setting the time
To set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.
A: Normal position of the crown
C: Position for setting the time
To set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.
User Manuals
Look at all the instructions and find out how your watch works.
- Set the Date
To set the date, pull the crown out to position B, and turn anticlockwise. To set the day, turn the crown in a clockwise direction. After resetting has been completed, press the crown back to position A.
To set the date, pull the crown out to position B, and turn anticlockwise. To set the day, turn the crown in a clockwise direction. After resetting has been completed, press the crown back to position A.
To set the date, pull the crown out to position B, and turn anticlockwise. To set the day, turn the crown in a clockwise direction. After resetting has been completed, press the crown back to position A.
1. Touch 1 sec
2. Active Mode
3. Touch 1.5 sec for backlight
Timeout after 20 sec stays in last activated mode
For an optimal use of the touch interface, wear the watch on your wrist or touch the battery cover.
4. Scroll to change function
5. Date Symbol
6. Month
7. Day
8. Year
9. Touch 1.5 sec
10. Short touch
11. Touch 1.5 sec to confirm
12. Scroll left for - / Scroll right for +
To set the date, pull the crown out to position B, and turn anticlockwise. To set the day, turn the crown in a clockwise direction. After resetting has been completed, press the crown back to position A.
To set the date, pull the crown out to position B, and turn anticlockwise. To set the day, turn the crown in a clockwise direction. After resetting has been completed, press the crown back to position A.
- Timing Mode
Press…
1. The upper push-button to start the chronograph.
2. Once again to read the elapsed time.
3. The lower push-button to reset.
Press…
1. The upper push-button to start the chronograph.
2. Once again to read the elapsed time.
3. The lower push-button to reset.
1. Touch 1 sec
2. Active Mode
3. Touch 1.5 sec for backlight
Timeout after 20 sec stays in last activated mode
For an optimal use of the touch interface, wear the watch on your wrist or touch the battery cover
4. Scroll to change function. Touch 1.5 sec to confirm.
5. Start
6. Stop
7. Restart
8. Stop
9. Touch 1.5 sec for reset
- Tachymeter
Measure the speed Base 100 or 1000 m.
Press...
1. The upper push-button when an action starts.
2. Once again to stop after a distance of 100 or 1000 m. Read the speed indicated by the 60 seconds counter (Retrograde: 30 sec.) on the tachymeter scale (km/h = kph).
3. The lower push-button to reset.
Measure the speed Base 100 or 1000 m.
Press...
1. The upper push-button when an action starts.
2. Once again to stop after a distance of 100 or 1000 m. Read the speed indicated by the 60 seconds counter (Retrograde: 30 sec.) on the tachymeter scale (km/h = kph).
3. The lower push-button to reset.
Measure the speed Base 100 or 1000 m.
Press...
1. The upper push-button when an action starts.
2. Once again to stop after a distance of 100 or 1000 m. Read the speed indicated by the 60 seconds counter (Retrograde: 30 sec.) on the tachymeter scale (km/h = kph).
3. The lower push-button to reset.
- Split Time
Press…
1. The upper push-button to start the chronograph.
2. The lower push-button to read the intermediary time.
3. Once again to continue (repeat the last two actions as many times as you wish to read the intermediary time while the chrono carries on).
4. The upper push-button to stop finally.
5. The lower push-button to reset.
Press…
1. The upper push-button to start the chronograph.
2. The lower push-button to read the intermediary time.
3. Once again to continue (repeat the last two actions as many times as you wish to read the intermediary time while the chrono carries on).
4. The upper push-button to stop finally.
5. The lower push-button to reset.
- Add Function
Press…
1. The upper push-button to start.
2. Press the upper push-button to read the first time.
3. Press the upper push-button to restart the chronograph.
4. Press the upper push-button to read the additional time (repeat these two steps as many time as you wish).
5. Press the lower push-button to reset.
Press…
1. The upper push-button to start.
2. Press the upper push-button to read the first time.
3. Press the upper push-button to restart the chronograph.
4. Press the upper push-button to read the additional time (repeat these two steps as many time as you wish).
5. Press the lower push-button to reset.
Press…
1. The upper push-button to start.
2. Press the upper push-button to read the first time.
3. Press the upper push-button to restart the chronograph.
4. Press the upper push-button to read the additional time (repeat these two steps as many time as you wish).
5. Press the lower push-button to reset.
- Manual Winding
- Measuring time
- Set the timer
- Alarm
SHOW ALARM TIME
1. Touch your Swatch.Hands move to show alarm time for approx. 4 secs.
STOP ALARM
2. Touch your Swatch to stop alarm.
Switch alarm on/off and set alarm time.
ALARM ON/OFF
3. Press crown and hands go to actual mode on or off.
…CHANGE ON/OFF
4. Press crown and hands go to actual mode on or off. Press crown again to change mode.
SHOW LAST ALARM
5. Pull crown to position 1 and the hands go to the last alarm time.
…SET NEW ALARM
6. To set a new alarm time, turn crown (turn slowly = minutes, turn quickly = hours).
GO
7. Then push crown back and hands turn back to time and alarm mode will be “on”.
ALARM DEMO
8. Press crown for 2 secs. to start alarm demo.
9. To stop press crown again.
Important: When the hands do not show correctly ON-OFF (alarm mode), the Touch Alarm must be adjusted (e.g. after battery change or a hard knock).
1. Touch 1 sec
2. Active Mode
3. Touch 1.5 sec for backlight. Timeout after 20 sec stays in last activated mode.
For an optimal use of the touch interface, wear the watch on your wrist or touch the battery cover
4. Scroll to change function
5. Alarm Symbol
6. Hour
7. Alarm ON
8. Minutes
9. Touch to stop alarm
10. Alarm OFF
11. Alarm based on T1, Alarm remains off until reactivated
12. Touch 1.5 sec
13. Short touch
14. Touch 1.5 sec to confirm
15. Scroll left for - / Scroll right for +
- Beep
- Settings
- Loomi
